Air corrector jets for Mikuni VM 24, 26 and 28mm round slide Mikunis.

  • zed1015
  • Topic Author
  • Away
  • User
More
01 Aug 2024 02:08 #902725 by zed1015

Hello Zed1015,
I want to buy a set of air correction jets for my Z1R 28mm carbs.
Can I buy them on Ebay if not please supply info on how to order them.
Thanks,
BostonBob
Hi, Bob.
You can email me at  zed.1015@yahoo.co.uk to order direct but i think you have just bought them through Ebay ?

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Please Log in or Create an account to join the conversation.

More
12 Nov 2024 22:35 #906012 by Treetall
Hi Zed
Wookie thought you might be able to help me out with my carb jetting.
I’ve got a 1978 kz1000 with VM26 carbs, bike came without the airbox, so I installed UNI air filters.
It’s got a Mac header. Right now it has a 110 main jet and a 15 pilot jet. 
Needle jet is set in the third / middle notch. I installed new carb holders and set the floats as per manual.
I can get the bike to idle but have to really feather the throttle to get it any more than that.

On a side note. I can’t seem to find your air correctors on eBay?
Thanks in advance

Please Log in or Create an account to join the conversation.

  • zed1015
  • Topic Author
  • Away
  • User
More
13 Nov 2024 03:58 - 13 Nov 2024 04:19 #906015 by zed1015

Hi Zed
Wookie thought you might be able to help me out with my carb jetting.
I’ve got a 1978 kz1000 with VM26 carbs, bike came without the airbox, so I installed UNI air filters.
It’s got a Mac header. Right now it has a 110 main jet and a 15 pilot jet. 
Needle jet is set in the third / middle notch. I installed new carb holders and set the floats as per manual.
I can get the bike to idle but have to really feather the throttle to get it any more than that.

On a side note. I can’t seem to find your air correctors on eBay?
Thanks in advance
Hi.
For pod use you should fit air correctors to clear the off idle bogging/hesitation.
Leave ALL other jets and needle position (middle) etc STOCK and just increase the mains.
Your stock main should be 105 and increased to 107.5 so the 110 is large enough and may need reducing.

Here's a link to the air correctors.
Air corrector jet kit.Kawasaki Z1,Z650,Z900,Z1000,Z1R.MK2, MIKUNI.LEDAR.PODS.K&N | eBay

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 13 Nov 2024 04:19 by zed1015.

Please Log in or Create an account to join the conversation.

More
13 Nov 2024 06:58 #906016 by Treetall

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum