Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Kz440 jetting for pods 27 Oct 2023 07:11 #891011

  • FreshMark
  • FreshMark's Avatar Topic Author
  • Offline
  • User
  • Posts: 19
  • Thank you received: 1
Hello,

After talking with others on this forum, I decided to give the stock carbs another try before attempting to replace them. I have a 1980 KZ440A with stock carbs from what I can tell. The one diaphragm has a tear in it that I will need to repair/replace. 

I am missing the actual filter piece to the stock airbox, as I only have the larger lower section. I would like to run pod filters since it makes carb installation and removal so much easier. I have all the original keys in the carb currently. What are your recommendations for jetting when using pods?

Thanks

Please Log in or Create an account to join the conversation.

Kz440 jetting for pods 27 Oct 2023 17:39 #891029

  • Nebr_Rex
  • Nebr_Rex's Avatar
  • Offline
  • User
  • Posts: 1876
  • Thank you received: 293
DynoJet jet kit for a KZ750 4 cylinder H or L model.
The 750s carbs are 34mm vs. the 440s 36mm.
They are identical to each other except for the ventri and slide size.
There is more to tuning a carburetor than just jets.


.
 
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected

www.dotheton.com/forum/index.php?topic=39120.0


.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Powered by Kunena Forum