Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Keihen Smoothbore? 07 Jul 2006 12:44 #60003

  • therealmithrandir
  • therealmithrandir's Avatar Topic Author
  • Offline
  • User
  • Posts: 4
  • Thank you received: 0
I am looking at getting a set of Keihen smoothbore carbs for my '78 KZ650.

Anyone have any experience with these?

Here is a link to the old bike barn where I plan on getting them from:
Old Bike Barn Link

Thanks,
Josh

Post edited by: steell, at: 2006/07/07 16:02

Please Log in or Create an account to join the conversation.

Keihen Smoothbore? 07 Jul 2006 13:05 #60009

  • steell
  • steell's Avatar
  • Offline
  • User
  • Posts: 6850
  • Thank you received: 207
$699.00 plus shipping!! Read Dave Sloan's MegaSquirt thread :)
KD9JUR

Please Log in or Create an account to join the conversation.

Keihen Smoothbore? 07 Jul 2006 17:01 #60060

  • therealmithrandir
  • therealmithrandir's Avatar Topic Author
  • Offline
  • User
  • Posts: 4
  • Thank you received: 0
I did read through that. Doesn't mention the Keihen carbs.
or were suggesting I dive into a setup like that one?

Please Log in or Create an account to join the conversation.

Keihen Smoothbore? 07 Jul 2006 20:14 #60091

  • steell
  • steell's Avatar
  • Offline
  • User
  • Posts: 6850
  • Thank you received: 207
I was suggesting that EFI is cheaper and better and it can be done by just about anyone :)

I hate carbs, I'd much rather just plug in a Palm or a notebook and adjust the fuel flow :D
KD9JUR

Please Log in or Create an account to join the conversation.

Keihen Smoothbore? 07 Jul 2006 20:36 #60098

  • therealmithrandir
  • therealmithrandir's Avatar Topic Author
  • Offline
  • User
  • Posts: 4
  • Thank you received: 0
Well tell me more. I hate carbs too! I don't know much about EFI.

How much, where, what equipment is needed? Is it really cheaper?? Better no doubt!

Josh

Please Log in or Create an account to join the conversation.

Keihen Smoothbore? 07 Jul 2006 21:25 #60111

  • steell
  • steell's Avatar
  • Offline
  • User
  • Posts: 6850
  • Thank you received: 207
Links are at the bottom.

MegaSquirt EFI controller kit is ~$140.00, ~$250 if you buy one assembled.

GPz1100 or GPz750 throttle bodies are a bolt on and can be had for around $50.00

Fuel pump and sensors can be scrounged from automotive junkyards for ~$25

Wideband sensor and controller is available for $200.00 and makes tuning easier, but is not absolutely required.

Need a Palm for tuning and datalogging $25-$35 on eBay. Although some people have carried a laptop either in a backpack or strapped on the seat behind them.

For info on MegaSquirt start HERE

I bought mine from DIY Autotune

The MegaSquirt-1 is all you need, but the new MicroSquirt made just for Motorcyles will be released soon at ~$300-$350
To rich for my blood though.
KD9JUR

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Powered by Kunena Forum