TOPIC:

im looking for a set of carbs to fit an 81 gpz 1100. if anyone can hook me up, or point me in the right direction it would be greatly appreciated.
-nick

Post edited by: chinup1100, at: 2007/01/06 14:33

Post edited by: chinup1100, at: 2007/01/23 01:49

----

Chinupp,

I have a set of carbs for an 81 or 82 - I'm not sure. Each carb has a vacuum diaphram on the side of it. I took them apart to clean them and have just not gotten them back together yet.

If you are interested in them I can reassemble and put in a kit for each carb, or you feel like doing this yourself I could just sell them to you. All the pieces are there and I would sort the pieces per carb so you could easily verify all is well.

PM me if interested

pmed

Post edited by: chinup1100, at: 2007/01/18 15:18

I have a set of MIKUNI F33-40 carbs in like new condition.If intrested let me know.

i have a set of early mikuni vm28's, from a 1974 or 1975 z1..

I've got a set of 79 Non Accel. pump VM 28's rebuilt and jetted for a 4 into 1 and pod filters I'll part with. I bought an extra set from a guy as they were a smoke'n deal. New o-rings, gaskets, pilot and main jets, needle and seat, air needles etc.

im looking for a set to fit an 81 gpz 1100.... if anyone has a set that would work with this bike pm me please.

What happened to the 82 kz1000 you needed carbs for?
The 81 1100 stock head was not designed to work with carbs so it's a little more work than bolting them on.

there never was an 82, i just mixed it all up... what i really need is carbs for an 81 gpz 1100...


how much more work is this going to be?