Gotsum stuff

asphalt900 wrote:

The crap i have, Measurements shown are from underneath the head to end of threads. 

Isthe 313 hollow?

All the ones shown, including the 313 are solid.

Wookie58, 
If you have a chance, and your axle is 20mm, I would appreciate knowing how long the unthreaded shaft is.

I will be disassembling in a couple of weeks so will let you know

Who is currently doing the best head work (porting, valves, etc)?

No recommendations?

There's a guy named Mike Rieck over on the SOHC Honda website. I'm pretty sure he works on other makes and I've only heard good things about his work.

No PSP or APE fans here?

TexasKZ wrote:

Wookie58, 
If you have a chance, and your axle is 20mm, I would appreciate knowing how long the unthreaded shaft is.

345mm total including the head (I machined the head round on mine to take the GSXR end) threaded section is 22mm

Wookie58 wrote:

TexasKZ wrote:

Wookie58, 
If you have a chance, and your axle is 20mm, I would appreciate knowing how long the unthreaded shaft is.

345mm total including the head (I machined the head round on mine to take the GSXR end) threaded section is 22mm

Thanks. If it is a 22mm axle, it will not work unless I want to have it machined down. Sigh.

TexasKZ wrote:

Wookie58 wrote:

TexasKZ wrote:

Wookie58, 
If you have a chance, and your axle is 20mm, I would appreciate knowing how long the unthreaded shaft is.

345mm total including the head (I machined the head round on mine to take the GSXR end) threaded section is 22mm

Thanks. If it is a 22mm axle, it will not work unless I want to have it machined down. Sigh.


 

it is 20mm diameter (22mm is the length of the threaded portion) 

Wookie58 wrote:

TexasKZ wrote:

Wookie58 wrote:

TexasKZ wrote:

Wookie58, 
If you have a chance, and your axle is 20mm, I would appreciate knowing how long the unthreaded shaft is.

345mm total including the head (I machined the head round on mine to take the GSXR end) threaded section is 22mm

Thanks. If it is a 22mm axle, it will not work unless I want to have it machined down. Sigh.



 

it is 20mm diameter (22mm is the length of the threaded portion) 

Ahh, my mistake. Looks like that is what I am looking for. Did you say it is from a GSXR600?