Swing swap, finally a ZRX swing
- mark1122
-
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: Swing swap, finally a ZRX swing
17 Feb 2009 15:02
Looking good man.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Z1109R Fin
-
Topic Author
- Offline
- User
- Posts: 385
- Thanks: 1
Re: Swing swap, finally a ZRX swing
18 Feb 2009 02:09
Thanx, Mark!
531b.....: i´dont´think so either. Before ZRX swing I had a GSXR ´90 and the wheel was off-set right then too. I believe that making a small mistake in alignment when tightening chain will make more off-set. I know this for a fact:S Did it once, one groove mistake and it just slam-dunked to right:blink: Scared the s"&t out of me....
531b.....: i´dont´think so either. Before ZRX swing I had a GSXR ´90 and the wheel was off-set right then too. I believe that making a small mistake in alignment when tightening chain will make more off-set. I know this for a fact:S Did it once, one groove mistake and it just slam-dunked to right:blink: Scared the s"&t out of me....
Z1000R ´83...Slightly modified...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:32
I have different ZRX swingarms in my ELR`s one from a ZRX 400 (were only sold in Japan) and the other from a ZRX 1100.
The 400 swing is a bit smaller but a 170mm tire with a 5" wheel fits perfect.
400 ...
The 400 swing is a bit smaller but a 170mm tire with a 5" wheel fits perfect.
400 ...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:33
1100 ...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:40
...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:42
...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:44
Z1000MK2 with Suzuki swingarm ...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:48
next pics are a Z1000 from 1978.
I made this one for a friend.
This frame is a bit smaller than the ELR or GPZ frames and the new swingarm has to be cut a little bit more ...
I made this one for a friend.
This frame is a bit smaller than the ELR or GPZ frames and the new swingarm has to be cut a little bit more ...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:49
...
Please Log in or Create an account to join the conversation.
- no name
-
- Offline
- User
- Posts: 98
- Thanks: 0
Re: Swing swap, finally a ZRX swing
20 Feb 2009 12:50
...
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: Swing swap, finally a ZRX swing
20 Feb 2009 16:19 - 25 Feb 2009 04:50
Nice work.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 25 Feb 2009 04:50 by mark1122.
Please Log in or Create an account to join the conversation.