Tail piece on 750 LTD

  • rcampbell
  • rcampbell's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1
  • Thanks: 0

Tail piece on 750 LTD

29 Jan 2006 12:09
#20412
I was just wondering if a plastic tail piece from a Z1 or KZ1000 or similar would be able to fit on my 1981 4cyl 750 LTD. I want to give it a sportier look and may eventually do a front end and swing arm swap as well.

Please Log in or Create an account to join the conversation.

  • DanOz7Five0
  • DanOz7Five0's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 347
  • Thanks: 0

Re: Tail piece on 750 LTD

04 Feb 2006 11:44
#21454
The LTDs frame is different at the rear "hoop".

Thats not to say its not possible but its probably not a direct bolt on. The LTD frame is more rounded.

Please Log in or Create an account to join the conversation.

  • rstnick
  • rstnick's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 4442
  • Thanks: 406

Re: Tail piece on 750 LTD

04 Feb 2006 12:19
#21462
There's a pic of creedmiller's 750 on page 2 in the Gallery of 750s.
.

Post edited by: rstnick, at: 2006/02/04 15:20
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project
1983 KZ1000R2 Project

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum