Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Technical Forums
Chassis
Front Master Cylinder
  • Page:
  • 1

TOPIC:

Front Master Cylinder 22 Jul 2006 21:10 #63984

  • rgpbeme
  • rgpbeme's Avatar Topic Author
  • Offline
  • User
  • Posts: 44
  • Thank you received: 0
I am going to put a kit in my front brake master cylinder. It is on a 79 mk 2. I went to take the fluid holder off the body and the screws seem real soft. I could feel the screw head slots giving like they were going to strip out. I had the right driver size but was afraid to put much tork on them. Is there something I should know before I screw something up?
Thanks Ron:blink:

Please Log in or Create an account to join the conversation.

Front Master Cylinder 22 Jul 2006 21:50 #63993

  • btchalice
  • btchalice's Avatar
  • Offline
  • User
  • Posts: 760
  • Thank you received: 7
id use an impact driver
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.

Please Log in or Create an account to join the conversation.

Front Master Cylinder 23 Jul 2006 02:05 #64009

  • fixer5000
  • fixer5000's Avatar
  • Offline
  • User
  • Posts: 415
  • Thank you received: 5
one of mine came right out...the other needed to be soaked for about 3 days in penetrating oil and whacked a few times before it would budge. be patient!!! steve
1978 kz650b pretty much stock
\\\\\\\" get there fast but arrive alive \\\\\\\"
massachusetts

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
Forum
Technical Forums
Chassis
Front Master Cylinder
Powered by Kunena Forum
PDM Custom Fabrications
Half Evil Customs