Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

1981 KZ 650 speedo 03 Jul 2006 21:45 #59132

  • camzaro28
  • camzaro28's Avatar Topic Author
  • Offline
  • User
  • Posts: 2
  • Thank you received: 0
not sure if this is the right forum, what less could you expect from a newbie. but here goes.

i am looking for a speedometer for a family member. he looked on ebay and went to kawasaki dealership. ebay did not have anything and the dealership wanted 500+ for it.
bike is a 1981 kawasaki KZ 650/H csr1

if i dont find it here, could someone recommend a place to look?
all suggestions welcome.
thanks in advance

Please Log in or Create an account to join the conversation.

1981 KZ 650 speedo 04 Jul 2006 09:24 #59237

  • JR
  • JR's Avatar
  • Offline
  • Sustaining Member
  • Posts: 2913
  • Thank you received: 435
I've seen speedos on the Old Bike Barn website www.oldbikebarn.com/index.php. I have never dealt with them so dont know how they are. I'm sure there must be a bunc of places that sell them. Hang around and someome will be along with a better suggestion than mine.
1980 kz750E1, Delkevic exhaust

Please Log in or Create an account to join the conversation.

1981 KZ 650 speedo 04 Jul 2006 10:00 #59250

  • RetroRiceRocketRider
  • RetroRiceRocketRider's Avatar
  • Offline
  • User
  • ...bring in the machine that goes PING!
  • Posts: 1641
  • Thank you received: 29
Tough break there, since the cross-reference software shows that speedo (part# 25005-1094) fitting only the '81 KZ650 CSR. :unsure:

You didn't say, is the speedo in question here just not functioning, or is it missing?

If not functioning, there are places that can restore and calibrate them to spec.


Check with Bob at Z-Resto (This email address is being protected from spambots. You need JavaScript enabled to view it.), he's in Atlanta, GA. Prices vary depending on the year and condition of the bike the gauge is from, but average restoration runs about US$85.
I'm not 100% sure that he can restore one for an '81 KZ since he usually only restores gauges from '72~'80, but it couldn't hurt to drop him a line and ask.
:)

Post edited by: RetroRiceRocketRider, at: 2006/07/04 13:02
Covina, So Calif!
78 KZ650-B2 = SOLD
84 ZN700 LTD = SOLD
84 ZX750 GPz = SOLD
89 GSX1100F Katana = SLEEPING :-/
20 VN1700 Vulcan Vaquero (the Blue Cowboy)
Looking for my next project KZ

Please Log in or Create an account to join the conversation.

1981 KZ 650 speedo 04 Jul 2006 12:24 #59283

  • btchalice
  • btchalice's Avatar
  • Offline
  • User
  • Posts: 760
  • Thank you received: 7
got any pics? i have a set from an 82 csr750
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.

Please Log in or Create an account to join the conversation.

. 04 Jul 2006 13:06 #59298

  • JMKZHI
  • JMKZHI's Avatar
  • Offline
  • Platinum Member
  • Posts: 2429
  • Thank you received: 48
del

Please Log in or Create an account to join the conversation.

Last edit: by JMKZHI.

1981 KZ 650 speedo 05 Jul 2006 18:19 #59565

  • camzaro28
  • camzaro28's Avatar Topic Author
  • Offline
  • User
  • Posts: 2
  • Thank you received: 0
all i know is that it is not working. and i told him i would try and find him some options on the net. seems like i have him a few leads.

ill throw this in here too. i guess it is a 4 carb bike? anyway after riding the bike for 20 minutes is starts to cut out and lose power. he says it feels like it is only running on 3 cyl's. anyway he thinks one of the carbs is bad and needs rebuilt, do u think he is on the right track?
thanks again guys. all suggestions appreciated.

Please Log in or Create an account to join the conversation.

. 05 Jul 2006 18:37 #59568

  • JMKZHI
  • JMKZHI's Avatar
  • Offline
  • Platinum Member
  • Posts: 2429
  • Thank you received: 48
del

Please Log in or Create an account to join the conversation.

Last edit: by JMKZHI.
  • Page:
  • 1
Powered by Kunena Forum