720 kit on kz 650
- kz550man
-
Topic Author
- Offline
- User
-
Registered
- Posts: 16
- Thanks: 0
720 kit on kz 650
14 Apr 2006 12:14
what will i have too put a 720 kit on my 78kz650c-1 can u tell me the modss an shit i will have to do thankssss
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-
Registered
- Posts: 2272
- Thanks: 512
Re: 720 kit on kz 650
14 Apr 2006 15:06
I installed a Wiseco 720 kit on my 78 KC650C about two years ago. It's pretty simple, it is a top end rebuild but instead of re-installing the stock pistons and rings you install the bigger pistona and rings. The only thing you are going to need is a machine shop to bore and hone the cylinders for the bigger pistons. I noticed a HUGE increase in power with the Wiseco kit.
I had to raise the needle in the carbs one slot and installed 17.5 pilot jets after the big bore kit. The bike was running a little lean at cruise throttle and idle. Good luck.
Post edited by: baldy110, at: 2006/04/14 18:08
I had to raise the needle in the carbs one slot and installed 17.5 pilot jets after the big bore kit. The bike was running a little lean at cruise throttle and idle. Good luck.
Post edited by: baldy110, at: 2006/04/14 18:08
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-
Public
- Thanks: 0
Re: 720 kit on kz 650
14 Apr 2006 18:04
Wiseco no longer makes the 720 kit, they now only offer the 700. We can not figure out why. We used to do a lot of those 720s. Never sold a single 700 kit until the 720 was discontinued.
Jay
Post edited by: APE Jay, at: 2006/04/14 21:05
Jay
Post edited by: APE Jay, at: 2006/04/14 21:05
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD