Welcome, Guest

TOPIC:

To carb or not to carb 12 Oct 2006 16:12 #83760

Prune1
Topic Author
Offline
User
Posts: 39
Thank you received: 0

Hello once again I plead for advice..I have my 1045cc installed in my 76 900 with the help of a 1000cc block, new valves, guides, seals through out the motor. I went up from 115 mains to 122.5. The bike seems to run hard. My question is can I benefit from putting a set of 34mm flatslides on? I fear if I bought them I would have too much carb on the bike. Also what if any mods would have to be done to get them to fit the 76 head? Thanks guys!

Please Log in or Create an account to join the conversation.

To carb or not to carb 12 Oct 2006 17:43 #83771

btchalice Offline User Posts: 760 Thank you received: 7	if they are jetted correctly you cant have too much carb Terry Meyer / Wichita KS 76 kz900 w/1000 motor TWZTD I am not driving too fast, I'm flying too low.
	Please Log in or Create an account to join the conversation.

To carb or not to carb 12 Oct 2006 18:57 #83785

wireman Visitor	start with professional porting post.
	Please Log in or Create an account to join the conversation.

Forum

Technical Forums

Engine

To carb or not to carb