TOPIC:

turboguzzi wrote: They all heat up, but if everyhting is wired right an R/R as they are called shouldn't go up in smoke upon starting a motor..... they are built to take quite a lot of heat, might fail often(like in H*nda VFR's, etc) but often means at least 10K miles

Instead of spending time on building a fan to cool it, look for where you wired it wrong

in my now defunct VFR, i just attached it to a large processor heat sink and it lived happy ever after....

I didnt run into a problem with it getting too hot. I only assumed since the cooling fins were present. Here is the stand alone since the pictures didn't f'in load haha.


[attachment:1]C:\fakepath\explination.png[/attachment]
[attachment:2]C:\fakepath\DSCN1346.JPG[/attachment]
[attachment:3]C:\fakepath\DSCN1352.JPG[/attachment]
[attachment:4]C:\fakepath\DSCN1353.JPG[/attachment]

uggggghhhh! Load

having issues...

one at a time
[attachment:1]C:\fakepath\explination.png[/attachment]

uggggghhhh! Load

Magic will load!
C:\fakepath\explination.png

Good Fortune!