Welcome, Guest

TOPIC:

point's are finally shot 21 Aug 2007 21:09 #165526

oldkaws4ever
Topic Author
Offline
User
Have no regrets...... You only live once.
Posts: 1648
Thank you received: 12

well i wet to start the 900 today and it was a no go. Ive noticed for about the past week it was getting progressivley harder to start. I took of the points cover and realised that the points that fire the 1 and 4 cylender wasn't moving back and forth like the other set of point's were. So im going to replace the points and condensor tommorow. And im also going to replace my rectifier/regulator while im at it.

74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois

Please Log in or Create an account to join the conversation.

point's are finally shot 21 Aug 2007 21:17 #165532

nads.com Offline User Posts: 1000 Thank you received: 20	Make sure the flat part of the point spring doesn't touch the plate when your done or yu might kick something besides the ....
	Please Log in or Create an account to join the conversation.

point's are finally shot 29 Aug 2007 08:21 #167106

Bluemeanie Offline User Posts: 2519 Thank you received: 14	Make sure you use a light coating (I use synthetic disc brake lube) on the cam to keep rubbing blocks from wearing down. 1980 KZ650F1, Bought new out the door for $2,162.98!
	Please Log in or Create an account to join the conversation.

Forum

Technical Forums

Electrical

point's are finally shot