TOPIC:

Hi

i am going through my fathers old inventory and need some help identifying these items. I’ve tried to find model numbers in stuff but it’s impossible. Y’all are genius as far as I’m concerned.  Would anyone be able to tell me what these are?

thanks in advance. 

 

Hello PoMoFleet,
Welcome to KZRider. I'm thinkin that you used the "back" button to access those pictures while you were composing that post. Please try again, this time use the Attachments | + Add Files buttons.
BillKZQ

I see two photos of the same axle, complete with chain adjusters and wheel spacers.  They may be off a KZ550 but I'm not certain.

Thank you. I am asking about the axle. Is there a way to tell what model this stuff fits? Are there any markings we should look for?

How about starting with The diameter? That would help a lot!
Z1/KZ900/1000 are 20mm / .787"
If they are 20mm? I could use one of those spacer collars.

Marty in Buffalo

Please try to repost pictures. I see a rear hub that appears to be a drum brake hub. As Z1kzonly says measure the axle

Z1 / KZ 900/1000. 20mm
And 11 - 9/16" Length.
And a Suzuki GS 1000/1100 looks similar. But is 12 - 1/2" long @ 20mm diameter.
HI Matt! Still want to talk Small Block? 400 / 4 bolt main / matching heads.
Also aluminum, angle plug 1990's heads. Have a nice 6 row cooler also.

z1kzonly wrote:

Z1 / KZ 900/1000. 20mm
And 11 - 9/16" Length.
And a Suzuki GS 1000/1100 looks similar. But is 12 - 1/2" long @ 20mm diameter.
HI Matt! Still want to talk Small Block? 400 / 4 bolt main / matching heads.
Also aluminum, angle plug 1990's heads. Have a nice 6 row cooler also.

Marty,  I’ll reach out. But I wanted to say you’re a magician at cleaning and restoring parts. I wish I had half of your talents 

Thanks Matt! I'm taking a batch of hardware to Tripp for Zinc coating soon.
And here is tonight's episode! The batch of parts I recently acquired. Had this nice tail light!. Like New for 45 years old!!   I cleaned it, polished the lens and painted the housing. I have been using the Dupli-Color caliper paint with ceramic, nice satin. I am going to re coat it and bake in oven on low. I just put it together for some pictures.
Very Nice KZ 76-80 Tail Light.
Even have a pile of stainless to fit a set of plate bolts. Use either acorns or Ny-Loks?
I get carried away sometimes! Like I'm building for myself. And it's only going to be for sale. 
But getting back to this guys axle? I'd buy it, if it is Z1 / KZ 20mm.

Marty in Buffalo
 

z1kzonly wrote:

Thanks Matt! I'm taking a batch of hardware to Tripp for Zinc coating soon.
And here is tonight's episode! The batch of parts I recently acquired. Had this nice tail light!. Like New for 45 years old!!   I cleaned it, polished the lens and painted the housing. I have been using the Dupli-Color caliper paint with ceramic, nice satin. I am going to re coat it and bake in oven on low. I just put it together for some pictures.
Very Nice KZ 76-80 Tail Light.
Even have a pile of stainless to fit a set of plate bolts. Use either acorns or Ny-Loks?
I get carried away sometimes! Like I'm building for myself. And it's only going to be for sale. 

But getting back to this guys axle? I'd buy it, if it is Z1 / KZ 20mm.

Marty in Buffalo
 

I’ll buy the tail light!

If Marty's not selling...pretty sure I have one complete that I would part with.  I'm currently on vacation in S BC.  Will be back home in a few days.

hardrockminer wrote:

If Marty's not selling...pretty sure I have one complete that I would part with.  I'm currently on vacation in S BC.  Will be back home in a few days.

Thank you HRM. I have one thank you. Was hoping to lessen my restorative efforts by buy one already completed.