can anyone I'd this fastener

More
11 Dec 2014 14:22 - 11 Dec 2014 14:23 #655861 by dkoz
can anyone I'd this fastener was created by dkoz
now after you tell me what it is. Can you tell me what tool to buy so I can get the windshield off of the fairing.I need to mail order..I've try ed vise grips but I'm only going to do more damage. Thanks

Attachment 20141211_160857-1.jpg not found

z1r windshield
1978 LTD B2 smashed
1978 Z1R D1
1978 A2
Attachments:
Last edit: 11 Dec 2014 14:23 by dkoz.

Please Log in or Create an account to join the conversation.

More
11 Dec 2014 14:49 #655863 by floivanus
Replied by floivanus on topic can anyone I'd this fastener
Thats a T nut it has points that dig into the piece it's in; got a bolt head on the other side?
my bikes; 80kz1000(project), 77 gl1000, 74 h2 (project)
Past; 78 kz1000, 83 kz550
Andrew
The following user(s) said Thank You: PLUMMEN

Please Log in or Create an account to join the conversation.

More
11 Dec 2014 16:43 #655872 by jakedude
Replied by jakedude on topic can anyone I'd this fastener
Every hardware store sells them.
Nothing lasts, nothing is finished, and nothing is perfect.

Please Log in or Create an account to join the conversation.

More
11 Dec 2014 18:02 #655877 by Klock74
Replied by Klock74 on topic can anyone I'd this fastener
you wont get it out on that side, gotta get that bolt out, then she will pop out. that sucker has teeth, dont spin it

Please Log in or Create an account to join the conversation.

More
11 Dec 2014 18:45 #655878 by Patton
Replied by Patton on topic can anyone I'd this fastener


Good Fortune! :)
1973 Z1
KZ900 LTD
Attachments:
The following user(s) said Thank You: !Seymore

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
11 Dec 2014 18:55 #655880 by SWest
Replied by SWest on topic can anyone I'd this fastener
Good job people.
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
12 Dec 2014 14:25 #655909 by dkoz
Replied by dkoz on topic can anyone I'd this fastener
Thanks guy's it has a nylon washer on the other side with a flat head screw. I couldn't hold this tnut with anything that I have so I'll have to search the web to see if there's a tool to hold it.
1978 LTD B2 smashed
1978 Z1R D1
1978 A2

Please Log in or Create an account to join the conversation.

More
12 Dec 2014 14:31 #655913 by moneypit
Replied by moneypit on topic can anyone I'd this fastener
Just unscrew the screw. The nut will stay put. Check Pattons pic!
2-76 kz900
St Paul MN

Please Log in or Create an account to join the conversation.

  • bluej58
  • Offline
  • Sustaining Member
  • The chrome don't get you home
More
12 Dec 2014 15:54 #655921 by bluej58
Replied by bluej58 on topic can anyone I'd this fastener
If it is spinning put a drop of penetrating oil on the threads and let it sit for a while then try to hold it with a needle nose while someone else unscrews of the other side, there is no special tool for that.
If that doesn't work maybe some glue or epoxy might help to hold it.
Good luck

JD
78 KZ1000 A2A

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
12 Dec 2014 19:38 #655944 by SWest
Replied by SWest on topic can anyone I'd this fastener
You might try to drill it out from the back side. I've done that with fly wheels. Drilling from the front tightens it but from the back, it spins right out.
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
13 Dec 2014 02:48 - 13 Dec 2014 02:53 #655948 by Patton
Replied by Patton on topic can anyone I'd this fastener

dkoz wrote: Thanks guy's it has a nylon washer on the other side with a flat head screw. I couldn't hold this tnut with anything that I have so I'll have to search the web to see if there's a tool to hold it.


To help hold the t-nut in position to keep it from spinning while attempting to turn out the flat head screw, perhaps could drill two holes in the areas shown below whereby the t-nut may be grasped with circlip/snap-ring pliars or tips of needle nose pliers. Or could insert metal screws and use a straight edge or nail or whatever between the metal screw heads to hold the t-nut steady while attempting to turn out the stuck flat head screw.





Good Fortune! :)
1973 Z1
KZ900 LTD
Attachments:
Last edit: 13 Dec 2014 02:53 by Patton.
The following user(s) said Thank You: dkoz

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Away
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
13 Dec 2014 07:31 #655951 by Street Fighter LTD
Replied by Street Fighter LTD on topic can anyone I'd this fastener
Check with some snowmobilers
. These t nuts are used to hold the studs on the tracks and they may have a tool with 3 prongs to hold it still.
I used to take a pair of needle nose pliers and hold the nuts still by just putting the tips in 2 of the 3 notches and holding on tight
Hope this helps

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links